+1.309.347.6155 | Toll Free 800.523.9129     Emergency Hotline Request a Quote Download Brochures Español
header int manufacturing solutions Brass & Bronze

Brass & Bronze

Red Brass

C83600
Material: UNS C86300 Manganese Bronze
Characteristics: High mechanical strength, good corrosion resistance and favorable castabiliy. When used as high strength bearings it requires hardened shafts.

Manganese Bronze

C86300
Material: UNS C86300 Manganese Bronze
Characteristics: High mechanical strength, good corrosion resistance and favorable castabiliy. When used as high strength bearings it requires hardened shafts.

C86500
Material: UNS C86500 Manganese Bronze
Characteristics: High mechanical strength, good corrosion resistance and favorable castabiliy. When used as high strength bearings it requires hardened shafts.

Leaded Tin Bronze

C93700
Material: UNS C93700 High Leaded Tin Bronze (Old SAE 64) (80-10-10)
Characteristics: One of the most commonly used bearing alloys, found in bearings operating at moderate loads and moderate-to-high speeds.

C93800
Material: UNS C93800 (Old SAE 67) High Leaded Tin Bronze (78-7-15)
Characteristics: One of the most commonly used bearing alloys, found in bearings operating at moderate loads and moderate-to-high speeds. This alloy is noted for its good corrosion resistance against concentrations of sulfuric acid below 78%.

Tin Bronze

C90300
Material: UNS C90300 Tin Bronze (88-8-4)
Characteristics: Hard, strong alloy with good corrosion resistance, especially against sea water. As bearings, they are wear resistant and resist pounding well. Moderately machinable.

C90500
Material: UNS C90500 Tin Bronze (Old SAE 62) (88-10-0-2)
Characteristics: Hard, strong alloy with good corrosion resistance, especially against sea water. As bearings, they are wear resistant and resist pounding well. Moderately machinable.

C90700
Material: UNS C90700 Tin Bronze (Old SAE 65) (89-11).
Characteristics: Hard, strong alloy with good corrosion resistance, especially against seawater. As bearings, they are wear resistant and resist pounding well. Moderately machinable.

C93200
Material: UNS C93200 High Leaded Tin Bronze (Old SAE 660) (83-7-7-3)
Characteristics: One of the most commonly used bearing alloys, found in bearings operating at moderate loads and moderate-to-high speeds. This alloy is considered the workhorse alloy of the High Leaded Tin Bronze Alloys.

C93500
Material: UNS C93500 High Leaded Tin Bronze (Old SAE 66) (85-5-9-1)
Characteristics: One of the most commonly used bearing alloys, found in bearings operating at moderate loads and moderate-to-high speeds.

C94300
Material: UNS C94300 High Leaded Tin Bronze (70-5-25)
Characteristics: One of the most commonly used bearing alloys, found in bearings operating at moderate loads and moderate-to-high speeds.

Aluminum Bronze

C95200
Material: UNS C95200 Aluminum Bronze 9A (AB9A) (88-3-9)
Characteristics: The Aluminum Bronzes are characterized by high strength and excellent corrosion resistance. Excellent heavy duty bearing alloys, but do not tolerate misalignment or dirty lubricants, and generally should be used against hardened steel shafts, with both shaft and bearing machined to fine surface finishes.

C95300
Material: UNS C95300 Aluminum Bronze 9B (AB9B) (89-1-10)
Characteristics: The Aluminum Bronzes are characterized by high strength and excellent corrosion resistance. Excellent heavy duty bearing alloys, but do not tolerate misalignment or dirty lubricants, and generally should be used against hardened steel shafts, with both shaft and bearing machined to fine surface finishes.

C95400
Material: UNS C95400 Aluminum Bronze 9C (AB9C) (85-4-11)
Characteristics: The Aluminum Bronzes are characterized by high strength and excellent corrosion resistance. Excellent heavy duty bearing alloys, but do not tolerate misalignment or dirty lubricants, and generally should be used against hardened steel shafts, with both shaft and bearing machined to fine surface finishes.

C95500
Material: UNS C95500 Aluminum Bronze 9D (AB9D) (81-4-4-11)
Characteristics: The Aluminum Bronzes are characterized by high strength and excellent corrosion resistance. Excellent heavy duty bearing alloys, but do not tolerate misalignment or dirty lubricants, and generally should be used against hardened steel shafts, with both shaft and bearing machined to fine surface finishes.

C95800
Material: UNS C95800 Nickel Aluminum Bronze
Characteristics: The Aluminum Bronzes are characterized by high strength and excellent corrosion resistance. Excellent heavy duty bearing alloys, but do not tolerate misalignment or dirty lubricants, and generally should be used against hardened steel shafts, with both shaft and bearing machined to fine surface finishes.

Do you have a custom alloy or something others have turned down?

Contact Us